High Temperature Resistant Plastic Injection Mould Water Plug Threadless Pressure Plug(D14,5pc)

1、Water plug is a metal part used for plastic mold or any pipelines of cooling or heating system, in accordance with the required flow to accomplish filling effect.

2、It is used for plastic molds, water pipelines cooling system, heating system of thermal conductivity.

3、Water plug uses principle of slope, extend O - ring and spring piece to fill.

4、Convenient to use, no need of tapping, never rust.

5、Tightness is adjustable freely, no need of water-stop belt.

Features:

Water plug is a metal part used for plastic mold or any pipelines of cooling or heating system, in accordance with the required flow to accomplish filling effect.

It is used for plastic molds, water pipelines cooling system, heating system of thermal conductivity.

Water plug uses principle of slope, extend O - ring and spring piece to fill.

Convenient to use, no need of tapping, never rust.

Tightness is adjustable freely, no need of water-stop belt.

It can be moved freely, placed in any places in water pipelines.

Specification:

Type and Quantity(Optional):D6,20pcs;D8,15pcs;D10,10pcs;D12,10pcs;D14,5pcs;D16,4pcs;D18,4pcs;D20,2pcs;D25,1pc;D30,1pc

Water Plug Bearing Force:

8mm diameter >16kg/cm2;

10 mm diameter >17kg/cm2;

12mm diameter >19kg/cm2

Operating Environment:

Normal Temperature:-10℃~+135℃

Special Water Plug Operating Temperature: -20℃~+280℃

Weight: 34g~93g / 1.2oz~3.3oz (approx.)

Package list:

1 * Water Plug

Note:

1. Any mold hole diameter should be 0.1mm larger than the outer diameter of water plug.e.g.for 8mm(outer diameter) water plug, the die hole should be 8.1 mm.

2. When water plug is in water pipeline, if it has not been in position, it can be loosen first, then pull out with a air nozzle jet for repositioning.