HMT VersaDrive ImpactaTap M12 x 1.75mm

15X FASTER THAN HAND TAPPING

VersaDrive ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes. However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.



Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use
Chipbreaker action for Automatic chip clearance when Impact Tapping
Unique Dual-Point Starting Angle for easy alignment and fast cut
High Grade Tool Steel with Ground Flutes for high accuracy & long life
GoldMax low-friction Titanium coating to stop heat burn out
High Strength, Non-slip Shank Design

Product Code Description Size Impact Torque Rating Based on Material Thickness of:
308010-0050 VersaDrive ImpactaTap M5 x 0.80mm 200 Nm 20mm
308010-0060 VersaDrive ImpactaTap M6 x 1.0mm 240 Nm 20mm
308010-0080 VersaDrive ImpactaTap M8 x 1.25mm 280 Nm 20mm
308010-0100 VersaDrive ImpactaTap M10 x 1.50mm 300 Nm 20mm
308010-0120 VersaDrive ImpactaTap M12 x 1.75mm 320 Nm 20mm
308010-0160 VersaDrive ImpactaTap M16 x 2.00mm 360 Nm 20mm
308010-0200 VersaDrive ImpactaTap M20 x 2.50mm 400 Nm 20mm
308010-0240 VersaDrive ImpactaTap M24 x 3.00mm 600 Nm 20mm
308020-0050 VersaDrive ImpactaTap for Galv Bolts M5 x 0.80mm 200 Nm 20mm
308020-0060 VersaDrive ImpactaTap for Galv Bolts M6 x 1.0mm 240 Nm 20mm
308020-0080 VersaDrive ImpactaTap for Galv Bolts M8 x 1.25mm 280 Nm 20mm
308020-0100 VersaDrive ImpactaTap for Galv Bolts M10 x 1.50mm 300 Nm 20mm
308020-0120 VersaDrive ImpactaTap for Galv Bolts M12 x 1.75mm 320 Nm 20mm
308020-0160 VersaDrive ImpactaTap for Galv Bolts M16 x 2.00mm 360 Nm 20mm
308020-0200 VersaDrive ImpactaTap for Galv Bolts M20 x 2.50mm 400 Nm 20mm
308020-0240 VersaDrive ImpactaTap for Galv Bolts M24 x 3.00mm 600 Nm 20mm