Silverline Hydraulic Bottle Jack 10 Ton 10T Tonne Lifting Car Van Truck 598558

The lift height is good fat with the long screw at the end of the cylinder has only one slide.

The jack is working, but the 125mm rollout is just a little bit right for my long-range 4x4. It does not go down alone after unscrewing the valve. The user manual is very succinct and is for people who have already used a jack bottle. Risk of letting all oil escape if you follow the commissioning instructions to the letter.

I find it hard to believe this jack is being used to lift a truck. Very short arm, ridiculously small end of the candle and delivered without a tip allowing to increase the lift, too small deflection implying a round trip with the candles to be purchased in addition. For the occasional by adding an intermediate wedge it can be fine, otherwise not great. But hey, considering the price, do not expect more.

unfortunately does not have enough power to lift a rear wheel of a 4T tractor. (which represents a maximum of 2T to lift.) it would be necessary to multiply by 2 or 3 the load to be lifted, a bit like for winches. Otherwise the delivery was super fast :)

Good value for money. It serves me of course as a jack to lift an entire side of the car and I can put the snow wheels 2 by 2. Used to push or lift a heavy load using chocks. Used to straighten deformed iron bars .... ect A downside, the closing / opening screw is plastic, so to handle gently.

Little jack, Chinese finish, the screw of the purge screw isn't painted, I had to clean it as the screw was blocked open! But it's good for the price, I'm not complaining. It raises up a motorbike easily.