Hydraulic Support Gas Springs 4pcs Kitchen Door Hinge 100N Furniture Support Gas Strut Kitchen Cabinet Door Lift with Screws MUMU
You may also like
Compare with similar items
Product information
Description
Use the hydraulic lift to open the lid and hold it firmly. Some items require two hands to handle, and it is extremely difficult if only one hand is needed to hold the door. You can easily lift the lid by yourself and hold it while putting something away or taking something out of the cabinet.
Use the gas lift for large lunch boxes. To prevent the lid from falling off and pinching your hands, make sure the lid can be opened and closed very easily. Thanks to the solid connection between the two arms, the absence function works perfectly to prevent a collision and ensure the safety of the arm. Children. Slows down the descent so that children's fingers are not pinched.
The furniture cylinder is suitable for lids or doors weighing 8 to 11 kg. Extended length: 265 mm; Compression length: 145mm (4.35 inches). The pressure of each spring can reach 100N (10kg). Note: Not suitable for steel or heavy tool holders.
Easy to use. Install the furniture door hinge. Position the spacer at the correct angle using the supplied mounting brackets. About 20% of the door width from the hinge. If you plan to use this for a new project, proceed with caution. Fully extend before installing so you don't accidentally drill holes in the mounting surface and have problems with the extension angle.
These kitchen door hinges come ready to install, with all the major components. Easy to install and if they fit into the brackets of the old one, remove the old one and insert the new one. In place. Lift the clip with the screwdriver, remove the hydraulic rod and insert the new one. In place.
Features
- BrandMUMU
- Length265 mm
- MaterialHorse chestnut
- Maximum load10 kg
- Pcs per pack4
'/%3E%3C/svg%3E){kind=small}