Ignition Coil Detector Ignition System Detector Ignition Coil Tester ADD750 Measures Ignition Coil
Buying for your business?
Negotiated prices excl. VAT up to -20%
You may also like
Wiha Volt Detector voltage tester, non-contact, single-pole 90 – 1,000 V AC I phase tester with optical signal (43798)
Draper Digital Multimeter 92433 with Auto and Manual Ranging for Precise Electrical Measurements
Wiha voltage and continuity tester 12 - 1,000 V AC, CAT IV incl. 2x AAA batteries I with LED display I one-hand testing (45216)
Wiha Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV incl. 2x AAA batteries I photovoltaic compatible I with LED display (45217)
Wiha Volt Detector voltage tester, non-contact, single-pole 12 – 1,000 V AC I phase tester with optical and acoustic signal (43797)
Wiha Voltage and continuity tester eMobility 12 – 1,000 V AC, CAT IV incl. 2x AAA batteries (44319)
Multifunctional wire tester, cable detector, MS6812 robotic lawnmower cable detector, LAN network cable line tester, robotic lawnmower wire break detector
Underground Cable and Wire Locator, Pet Fence Tester, Up to 2-3 Feet Deep and 1000 Feet
Compare with similar items
Product information
Description
Features
Portable battery-powered plug-in quick coil ignition tester with stable and professional performance.
Designed to quickly and easily determine if the COP is producing the correct spark for the spark plug.
It works by receiving the signal from the secondary ignition coil and the test result is accurate and reliable.
Once the signal is received, the tester will determine if the COP is producing the correct amount of voltage and arc duration.
If the voltage is correct, the tester will beep and the red LED will flash; if the arc duration is correct, the green LED will also flash.
specification
Item Type: Ignition Coil Tester
Material:ABS
Battery: CR2032 button battery, 120 mAh (built-in)
How to use:
1. Correctly connect the connector and sensor head to the tester
2. The induction head is aligned with the ignition coil to start working, and the working state of the ignition coil is judged according to the lighting result.
Test results:
Red LED light
A steady, constant flash and beep indicates that the COP is producing the correct amount of voltage.
No response or an inconsistent response indicates that the COP is NOT producing the correct amount of voltage.
This may be due to one of the following causes:
1. Dirty spark plug or incorrect gaps
2. Damaged/corroded wires or connectors
3. Defective coil or PCM
Green LED light
A steady, steady flash indicates the arc duration is correct.
No response or an inconsistent response indicates that the arc duration is NOT correct.
This may be due to one of the following causes:
1.Shorted windings inside the coil
2. Resistance or poor connections in the
3. primary/secondary connections
4. Defective coil
Features
- BrandOTHERS
- Power sourceBatteries
- Battery or cell includedYes
- ColourMulticolour
- MaterialPlaster
- Type of voltage detectionContact-based
- ManoMano ReferenceME247333739
- MMID337746937197
- Product codeQD-GB26Y87539
- EAN3798444241079
'/%3E%3C/svg%3E){kind=small}