1/5

Ignition coil detector, ignition system detector, ignition coil tester ADD750 measures the ignition coil

~~£83.10~~

Of which environmental contribution £0.01 including VAT.

Buying for your business?

Negotiated prices excl. VAT up to -20%

Product information

Features

Portable, battery-powered, rapid ignition coil tester with stable and professional performance.

Designed to easily and quickly determine if the COP is producing the correct spark for the spark plug.

It works by receiving the signal from the secondary ignition coil, and the test result is accurate and reliable.

Once the signal is received, the tester determines if the COP is producing the correct amount of voltage and the arc duration.

If the voltage is correct, the tester will beep and the red LED will flash; if the arc duration is correct, the green LED will also flash.

Specification

Item Type: Ignition Coil Tester

Material: ABS

Battery: CR2032 120mAh button cell (built-in)

How to Use:

1. Connect the connector and sensor head to the tester correctly.

2. Align the induction head with the ignition coil to begin operation. The operating status of the ignition coil is determined by the light output.

Test Results:

Red LED Light

Constant flashing and beeping indicate that the coil is producing the correct voltage.

No response or an inconsistent response indicates that the coil is not producing the correct voltage.

This may be due to one of the following causes:

1. Fouled spark plug or incorrect gaps

2. Damaged/corroded wires or connectors

3. Faulty coil or PCM

Green LED light

A steady, constant flashing indicates that the arc duration is correct.

No response or an inconsistent response indicates that the arc duration is NOT correct.

This may be due to one of the following causes:

1. Shorted windings inside the coil

2. Resistance or poor connections in the

3. Primary/secondary connections

4. Faulty coil

You are here: