Interface diagnostic device, OPCOM 2012V CAN OBD2 operator firmware V1.99, USB, black--DTEKGAZ

OPCOM 2012V Diagnostic Interface with CAN Bus OBD2 Firmware V1.99, USB, Black. Features: Comprehensive status information (current, absent, intermittent); fault codes can be printed, saved, or copied to other applications; direct access to the measuring block menu via the fault code menu; display of information from multiple control units; display of up to 8 measuring parameters simultaneously; the sampling rate depends on the communication protocol. 1. Compatible with almost all Opel models, including newer vehicles with CAN bus diagnostic functionality such as the Vectra-C, Astra-H, and Zafira-B. 2. Reads and clears fault codes, displays real-time data, and performs output tests. 3. Supports numerous control units such as engine, automatic transmission, ABS, airbag, engine cooling module, instrument cluster, air conditioning, body control module, etc. 4. Since Opel uses multiple pins in the OBD connector, the diagnostic interface acts as a multiplexer and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial connection (ISO9141, KW81, KW82, KWP2000) 5. The error code is displayed with all available information: Full description of the error code: 1) Complete status information (present, absent, flashing) 2) You can print, save, or copy the error codes to another application. From the error code window, you can directly access the measurement block window. 3) The program displays measurement information for blocks on various control modules, which you can select from the list. 4) The program can display 8 measurement block parameters simultaneously. The sampling rate depends significantly on the communication protocol. For example, older systems such as Omega-B X 25 DT (ISO-9141-2) motors can be very slow in communication, while newer Multec or Bosch units (with KWP-2000) are faster, and the latest CAN-based control unit is very fast! You can also perform output tests on multiple controllers. PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN – High-speed two-wire CAN bus, 500 kbit/s MSCAN – Medium-speed two-wire CAN bus, 95 kbit/s SWCAN – Low-speed one-wire CAN bus, 33.3 kbit/s Scope of delivery: 1 x OP COM connector, 1 x USB cable, 1 x software and driver CD Note: Only the 32-bit operating systems Windows XP and Windows 7 are supported; other systems are not supported.