12V 24V 32V Boat Float Switch, Good Sealing, Marine Submersible Bilge Pump, Automatic Switch

Features: 1. Automatic Drainage: Used with a micropump to create an unattended drainage system with switches that ensure reliable pump operation from a fully sealed bilge. 2. Wide Application: With ultrasonic welding, it offers a good seal and can be used for automatic operation of bilge pumps or alarms with 12V, 24V, or even 32V systems. 3. Operation: When the water level is above 1.77-1.97 inches, the pump automatically turns on, and when the water level drops to 0.79-0.98 inches, the pump automatically turns off. 4. Installation: The switch is installed in the bilge with the bilge pump (not included). For best performance, it should be installed horizontally at a maximum angle of 30 degrees. 5. Durable Material: Constructed with sturdy ABS material, simple appearance, easy installation, internal metal contacts to ensure reliable start and stop, easy installation. Specifications: Item Type: Boat Float Switch Material: ABS, Metal Operating Voltage: 12V/24V/32V Maximum Current: 25A Wire Gauge: 14 AWG Note: When the switch is activated, the panel is in manual mode; start the pump manually. When you release your hand from the control panel, the control panel rotates. Connection: 1. Connect the brown wire of the float switch to the positive terminal of the pump (brown wire), then connect the wire to the manual option on the switch panel. 2. Connect the other brown wire of the float switch to the automatic option on the switch panel. 3. Connect the negative terminal (black wire) of the pump to the negative terminal of the battery. Package List: 1 x Boat Float Switch 1 x Manual 2 x Screws