JGY370 Turbine Threaded Shaft Motor M8 Screw Low Speed SelfLocking Motor Shaft Length 33mm DC24V(10RPM )

1、The shell is made of alloy material, which is wear resistant, not rusty, not easy to corrode, has excellent thermal conductivity, durable, strong power, long life, low loss, and low heat generation.

2、Carbon brush structure replaces copper brush, with long service life, low friction, low power consumption and slow temperature rise.

3、The use of silent lubricating oil ensures long term quiet operation of the motor shaft and effectively reduces the vibration value of the bearing to prevent rust and corrosion.

4、The shaft is made of stainless steel, and the high‑precision mechanism runs smoothly and is quieter. After the gear is ground, it has better performance and wear resistance after heat treatment.

5、8mm thick rod, long term use without heat, can make mini motors, DIY robot models, homemade shakers, etc.Item Type: Encoder Geared Motor

Material: Zinc Alloy, Copper, Carbon, Stainless Steel

Purpose: Industrial Drive Device

Operating Voltage: DC 24V

Output Shaft Size (Diameter x Length): Approx. 8 x 33mm / 0.31 x 1.30in

Shaft Type: M8 Threaded Shaft

Whether to Adjust the Speed: Adjustable Speed

Whether Forward and Reverse: Can Be Forward and Reverse

Parameters Table:

Reduction Ratio (Change Ratio): 40/65/90/150/200/260/340/600/1000

No-load Current (MA): ≤40 / ≤40 / ≤40 / ≤40 / ≤40 / ≤40 / ≤40 / ≤40 / ≤40

No-load Speed (rpm): 150/90/66/40/30/23/18/10/6

Rated Torsion (kg.cm): 0.2 / 0.5 / 0.7 / 2 / 5.3 / 6.7 / 9 / 15.9 / 26.5

Rated Speed (rpm): 120/70/51/30/22/18/15 / 7.5 / 4

Rated Current (A): ≤0.3 / ≤0.3 / ≤0.3 / ≤0.3 / ≤0.3 / ≤0.3 / ≤0.3 / ≤0.3 / ≤0.3

Maximum Torsion (Kg.cm): 0.9 / 1.6 / 2 / 7.5 / 10/13/18/30/45

Stall Current (A): 0.85 / 0.85 / 0.85 / 0.85 / 0.85 / 0.85 / 0.85 / 0.85 / 0.85

Reduction Ratio (Change Ratio)	40	65	90	150	200	260	340	600	1000
No-load Current (MA)	≤40	≤40	≤40	≤40	≤40	≤40	≤40	≤40	≤40
No-load Speed (rpm)	150	90	66	40	30	23	18	10	6
Rated Torsion (kg.cm)	0.2	0.5	0.7	2	5.3	6.7	9	15.9	26.5
Rated Speed (rpm)	120	70	51	30	22	18	15	7.5	4
Rated Current (A)	≤0.3	≤0.3	≤0.3	≤0.3	≤0.3	≤0.3	≤0.3	≤0.3	≤0.3
Maximum Torsion (Kg.cm)	0.9	1.6	2	7.5	10	13	18	30	45
Stall Current (A)	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85

1 x Encoder Geared Motor