K1 Ceramic Heating Head Kit Unicorn Quick-Replace Nozzle, All-Metal Integrated Extruder Heating Head Replacement, High Temperature 300°C

Creality K1 Ceramic Printhead Kit with Unicorn Quick Swap Nozzle: Replace the integrated all-metal printhead for Creality K1C and K1 MAX 3D printers. Uniform heating with high thermal conductivity: The 360° ceramic heater improves heating efficiency, uniformity, and heat transfer. Efficient cooling for easy printing: The heat dissipation section is divided for reduced heat transfer. The red copper heat sink enhances cooling efficiency. High flow rate for high-speed printing: The enlarged nozzle chamber achieves a maximum flow rate of 32 mm³/s and enables high-speed printing of 600 mm/s. Unicorn Quick Swap Nozzle: The Creality K1C/K1 MAX printhead is integrated all-metal for quick mounting and dismounting. The nozzle and heat sink are also all-metal, making them easy to remove and replace. 【Upgraded Material, Suitable for Printing Various Filaments】The heat sink is made of titanium alloy, reducing heat conduction. The nozzle, made of a copper alloy and hardened steel, allows for printing with various filaments. Note: (1) Nozzle clogging depends on the type of filament used and the ambient temperature during printing. K1 series printers, being enclosed, may experience PLA filament clogging due to poor heat dissipation. For PLA filament, it is recommended to leave the printer enclosure open during printing to improve heat dissipation and reduce the risk of clogging. (2) Clogging can occur when the first layer does not adhere properly, causing the nozzle to move outwards. Ensure good adhesion when printing the first layer; if necessary, readjust the level and apply glue to improve adhesion.