Kit of test of compression for engine to gasoline 9 parts - RWKit for compressor

Package contents : The tester of compression for motorcycle includes : 1 gauge to spring ; 4 adapters in brass (M10, M12, M14, M18) ; 1 connector of extension metal ; 1 rod metal right and 1 rod metal courbee in aluminum for the tests directs ; and a hose extension in rubber for the tests to distance. This tester of pressure of fuel complete you offers a large practicality. You n'avez not need buying these parts separators.

Gauge to double scale : Gauge to double division, range of measures of 0 to 20 bar (0 to 300 psi), cover in glass acrylic with protection in rubber for prevent the scratches and give a excellent absorption of the impacts. Thanks to the anti-return anti-return integrated with function of holding of the pressure, you obtiendrez of the measurements precise with our gauge of compression engine.

Function : This kit of tester of compression is designed for detect various fault engine excessifs, such qu'une valve of discharge defective, of the depots of carbon, a culasse actuelle or a seal of vilebrequin defective, a set of rings of piston defective or worn, or a piston burn or damaged. The design unique of the valve of safety the makes resistant to the pressure of the fuel and ensures a safety optimal. Application : Tester of compression for motorcycles with adapters of plugs and of lathes of different sizes, widely used on the most of the cylinder of engines to gasoline and to plugs profondes, especially on the motorcycles, mowers to lawn, cars, trucks, quads, etc. Note : This gauge of compression no not suitable to the engines diesel. Storage easy : All the parts are rows in a housing in plastic for protect the components and facilitate the transport and the storage. The kit of tester of compression integrated for motorcycle you allows of tested of many systems of the engine.

Product Description :

Specifications :

Unit/mode of test : bar, PSI ; (Max. 300 psi/20 bar).

Materials : Metal, Rubber

Diameter of the gauge : 75 mm

Four sizes of thread : M10 x 1,0 mm, M12 x 1,25 mm, M14 x 1,25 mm, M18 x 1,5 mm

Length total of the hose : 16,7"/425 mm

Length of the tube of pressure right : 153 mm

Length of the tube of pressure incline : 155 mm

Connector of rod extension metal : 7,6 inches/195 mm

The package includes :

1 x gauge to spring (max. 300 psi or 20 bar).

4 adapters in brass M10, M12, M14, M18.

1 x cap right.

1 x cap angled.

1 x connector of rod extension metal.

With a manual instructions detaille

Mode d'emploi :

1. Hurry the engine and laissez-the reach its temperature of operation normally. A times the engine redemarre, déchargez all the plugs ignition ;

2. Open completely the gas and place the fitting of the gauge on l'orifice of the spark ignition cold ;