Kits de accesorios Prenine 4 CB440 Makita, escobillas de carbon, escobillas de carbono para taladros Makita CB-440 DF458Z DTD140 DTD146 DHP456 DHP458 / 482 DTW251 BHP451 BHP452, 13 x 10 x 3 mm.

The carbon escobilla is installed in the portaescobillas to guarantee free movement from arriba abajo. The separation between the escobilla and the interior wall of the portaescobillas is between 0.1 and 0.3 mm, which avoids being subject to excessive space between the escobilla and the portaescobillas. The distance between the lower edge of the portaescobillas and the surface of the switch should be approximately 2 mm.The carbon escobillas are suitable for various motors, generators and jets. Offers improved switching performance.The carbon fiber will move as soon as possible and it will drop into the port. Remove the excess if it is not working properly. If the carbon fiber is lost at any point, it must be replaced. If the new and old cables are mixed, the distribution of the current can be damaged. If the conductor cable of the carbon fiber is covered with an easy tube, it must be replaced. install on the base of the carbon fiber blade.The direction of the surface must be correctly positioned; On the other hand, if the contact area is too small, the electrical power will be low or no power will be produced. of good end. Characteristics: - Long life, useful and durable. - Long life and resistance to damage. Adjusts universal: Para MAKITA CB-440 BHP458 18V BDF452 BHP454 Para Makita DDF458Z DF458D DDF458RFE DHP458 BHP458 DDF458 BDF458 BDF458RFE BDF458Z BDF446 BDF456 BHP446 BHP456 DHP456 DDF456 BDF452 DTD146 and other machines Specifications: Material: Cobre + Carbono Cantidad: 4 piezas Item size: 13 * 10 * 3 mm / 0.51 * 0.39 * 0.11" (L * An * Al) Neto weight: 30g / 1.06 oz Package: 4 * for carbon