km range, 2 channels, 12 V DC, radio remote control with transmitter and receiver

Product Information

Features:

1. Advantages: High privacy, stable performance, and low power consumption.
2. High sensitivity: The wireless RF signal penetrates walls, floors, doors, and windows.
3. Very convenient: You can turn the receiver on and off with the transmitter (remote control) from anywhere within a reliable range.
4. The remote control's range is 0 to 3000 meters – the ideal distance without signal interference or obstacles. With signal interference or obstacles, the range may increase or decrease by approximately 10% to 90%.
5. Applications: Control of lamps, televisions, motors, fans, cameras, video signals, audio signals, doors, electric locks, and windows, etc.

Specifications:

Features:
100% brand new and high-quality wireless controller.
Advantages: High data protection, stable performance, and low power consumption.
High sensitivity: The wireless RF signal penetrates walls, floors, doors, and windows. The remote control's range is 0 to 3000 meters – the ideal distance without signal interference or obstacles. With signal interference or obstacles, the range may increase or decrease by approximately 10% to 90%. Very convenient: You can switch the receiver on and off from anywhere within range using the transmitter (remote control). Easy to use: Wireless control, simple installation, directly replaces your old or defective receiver. Application: Control of lighting, televisions, motors, fans, cameras, video signals, audio signals, electric doors/locks/windows, etc.
Specifications:
Material: ABS
Color: Black (receiver) + Gray (transmitter)
Remote control battery: 2 x AA batteries (not included)
Channels: 2
Remote control range: 0–3000 m (ideal range without signal blocking or interference; may increase or decrease by approximately 10–90% in case of signal blocking and interference).
Encoding: Fixed code, soldered
Frequency: 433 MHz
Decoding: Fixed code, soldered
Power supply (operating voltage): 12 V DC (3 V/6 V/9 V/24 V customizable)
Quiescent current: ≤ 10 mA
Operating temperature: -40 °C to +80 °C °C
Receiver sensitivity: ≥-95 dB
Output current: ≤10 A
Operating modes: Pop-up, Tipping, Self-locking, Lock (adjustable)
Output mode: Contact output (AC and DC controllable)
Connection to a 12 V DC output source
Receiver: 8 x 3.5 x 2 cm
Remote control: 15 x 4 x 2.5 cm
Package weight: 92 g
Modes:
1. Activation/Self-locking: Press -> On; press again -> Off
- To turn on, press one button. To turn off, press the same button again. (1-channel switch (receiver) requires a 1-button remote control (transmitter).
2. Latch: Press -> On; press another button -> Off.
- Press one button to turn on, another to turn off. (1-channel switch (receiver) requires a 2-button remote control (transmitter).
3. Momentary/Jog: Press and hold -> On; release -> Off.
- Press and hold one button to turn on. Release to turn off. (1-channel switch (receiver) requires a 1-button remote control (transmitter)).
(Default setting: Momentary; change manually.)
Learning and deleting codes:
1. Learning: Press the learn code button. The power indicator goes out; release the button. Press any button on the remote control. The indicator flashes twice and then goes out. Learned successfully.
2. Deleting: Press and hold the learn button for approximately 8 seconds. Press and hold. The indicator will flash and then turn off. The LED will flash cyclically, indicating that the code has been successfully removed. Instructions: Pulse Learning: Press the learn button on the control panel once. The LED will flash once and then turn off. Then press the button on the remote control you want to code. The LED on the control panel will flash several times in succession, indicating that the code has been successfully entered. Self-Locking Learning: Press the learn button on the control panel twice. The LED will flash twice in succession and then turn off. Then press the button on the remote control you want to code. The LED on the control panel will flash several times in succession, indicating that the code has been successfully entered. Learning: Press the learn button on the control panel three times. 5-Second Delay: Press the learn button on the control panel four times. The LED will flash four times in succession and then turn off. Then press buttons A and B on the remote control you want to code. The LED on the control panel The LED flashes several times in succession, indicating that the code has been successfully programmed.
5-second delay: Press the learn button. Press the button on the control panel 4 times. The LED flashes 4 times and then goes out. Then press the A button on the remote control you want to code. The LED on the control panel flashes continuously several times, indicating successful programming.
10-second delay: Press the learn button on the control panel 5 times. The LED flashes 5 times and then goes out. Then press the A button on the remote control you want to code. The LED on the control panel flashes continuously several times, indicating successful programming.
15-second delay: Press the learn button on the control panel 6 times. The LED flashes 6 times and then goes out. Then press the A button on the remote control you want to code. Coding is complete. The LED on the control panel flashes continuously several times, indicating successful programming. Coding.
Scope of delivery:
1 x 3 km remote control transmitter (battery not included)
1 x remote control receiver module (housing included)
Note:
1. Batteries are very dangerous during transport and must therefore be purchased separately.
2. Due to manual measurement, there may be deviations of 1.27–2.54 cm.