KZQ Remote control for shutter, compatible with Somfy Keytis 2, 4 RTS, Keygo, Telis 433 MHz
You may also like
Compare with similar items
Product information
Description
Please note that this is a compatible remote control, it is not an original product.
Frequency: 433 MHz. alkaline 12 V / 27 A.
List compatible (only RTS) :
Keytis NS 2 RTS / Keytis NS 4 RTS.
Keytis 2 RTS / Keytis 4 RTS.
Keygo 4RTS.
Telis Soliris 1 RTS / Telis 4 Soliris RTS.
Telis 1 Modulis RTS / Telis 4 Modulis RTS.
Compatible with similar receivers and door openers: AX24ns, AC230ns, Axovia, Elixe, Ixo, Axoro, Passongo, Passongo, Axoro Dexxo, FreRoll, Oximo RTS, Orea RTS, Altus RTS, LT CSI RTS.
Programming Black Keytis.
1. Open the receiver case. It is located near your engine.
2. On the receiver board, press the Prog 1 programming button until the
L1 LED lights up on the receiver.
3. Press a button on your new remote. Then relax. The LED light on the receiver flashes and then goes out.
4. Hold for 10 seconds. Your new remote control is programmed.
Programming White Telis with hidden button.
1. Press the hidden button for 2 to 3 seconds on the original remote.
2. Press buttons 1 and 2 on the new remote for about 1 to 2 seconds at the same time, then press button 4 for 1 to 2 seconds. Your remote control is now ready to operate.
Contents :1 remote control.
Features
- BrandKZQ
- ColourBlack
- Pcs per pack1
- Voltage12 V
- NF certificationNF230
'/%3E%3C/svg%3E){kind=small}