LED Automatic, 12 LED USB Rechargeable Closet Night Light with Motion Sensor Magnetic Adhesive Strip, 3 Modes (Auto/On/Off) for Bedrooms, Stairs, Wardrobes, Hallway 2Pcs，

The scope of application is wide and can be applied to wardrobes, cabinets, wine cabinets, shoe cabinets, etc. At the same time, it can also be hung on the wall as a night light and door night light.

1. Using 12 high-brightness SMD LEDs

2. Use USB lithium battery to charge, no need to replace the battery, more convenient to use

3. Rechargeable battery capacity: 600 mAh

Machine working current: 180 mA

4. Press to use 20 times, each time the light is turned on for 15 seconds, it can be used continuously for about 2 months before charging

5. LED life: more than 30,000 hours, LED brightness: more than 240 lm

6. Induction sensitivity distance: 3 meters, induction sensitivity angle: horizontal 60 degrees, vertical 30 degrees

7. Three-speed switch:

"ON" is always on, and no sensing function is available at this time;

"OFF" is the closed state

"AUTO" is the induction state (at present, it has dual human body induction and light control)

8. Product working environment temperature: 0℃-40℃

Working environment humidity: 5%-93%

9. Working voltage DC3-4.2V

10. Product gross weight: 90g

11. Product size: 120 x 38 x 17 mm (length x width x height).

12.Easy to install and remove] Method1: Magnets, iron sheets and "3M" tapes are included in the package. Just stick the iron sheet where you want, and then stick the magnetic sheet on the lamp holder, you can easily install or remove the closet light. Method2: There are hanging holes on the back of the lamp, which can be hung on screws on the wall (screws are not provided)

Delivery quantity: 2 pieces