Liquid Level Sensor, Stainless Steel Float Switch, Liquid Water Level Sensor, 220V, for Swimming Pool Can, 100mm
You may also like
Compare with similar items
Product information
Description
Specification: Material: SUS304 and SUS316
Operating Voltage: 0 ~ 220 (V)
Operating Current: 0.5 A-1 (A)
Operating Temperature: 0 ~ 120 ℃
Maximum Temperature Tolerance: 120 (℃)
Working Pressure: 1 (MPa)
Maximum Withstand Voltage: 5 (MPa)
Maximum Power: Low Voltage: 10W
High Voltage: 50W
【High-Quality Materials】: The floating ball of the liquid level sensor is made of 304 stainless steel, and the script is made of 316L stainless steel. It is strong and durable. High-temperature resistance means the float ball switch can withstand temperatures of up to 120 degrees Celsius for extended periods. [Water Level Detection]: The float level sensor with water level sensor is a simple and practical control solution. The float ball switch can be installed at the top or bottom of the water tank, depending on whether you want to detect rising or falling water levels. [Widely Applicable]: Float switches can be used in water heating equipment such as water pumps, water dispensers, water heaters, air conditioners, humidifiers, and bathroom fixtures. It has wide application prospects in the automotive, industrial equipment, agricultural equipment, and other sectors.
【Operating Voltage】: It can operate under AC 0-220V and DC 0-200V circuits, making it suitable for most power supplies. Low voltage means the floating ball switch can be used in 0-110V DC circuits. High voltage refers to using floating ball switches with 0~220V and DC 0~200V lines.
【Other Precautions】: The liquid level sensor can withstand a maximum of 5 MPa, allowing it to operate in most environments. The floating ball switch cannot directly control solenoid valves or high-power relays, AC contactors, etc., which require the use of small relays.
Features
- BrandOTHERS
- ColourGrey
- Float typeCable float
- ManoMano ReferenceME223296091
- MMID814423447475
Submersible pump buying guide
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E){kind=small}