Lot of 2 TOP432EV multi-frequency remote controls – 433 MHz RF copiers (check frequency), range 50–100 m, ABS housing, 2× CR2016

General Description: Pack of 2 TOP432EV multi-frequency remote controls designed for quick and easy cloning of RF transmitters (garage doors, gates, alarms, automation systems, lighting). Compact and lightweight (25 g), they incorporate a new copy chipset capable of reproducing even long fixed codes, offering a practical solution for installing a backup or replacement remote control. Important: It is essential to verify that your receiver operates at 433 MHz — without a frequency match, the device will be unusable. Technical Specifications: Part Number: TOP432EV (pack of 2) Dimensions: 66 × 30 × 11 mm Weight: 25 g (with packaging) per unit Housing: Durable ABS Frequency: Focused on 433 MHz (tolerance ±0.2 MHz) — check the receiver's frequency. Transmit power: ≥ 8 mW Range: 50–100 m in open field Power supply: DC 6 V (2 × CR2016 button cell batteries per remote, not included) Operating current: ≤ 12 mA Transmission speed: 50–60 kHz Operating temperature: -20 °C to +70 °C Storage temperature: -10 °C to +50 °C Storage humidity: ≤ 85% Chip: New copy chip (supports long/fixed codes) Oscillation/resistance: Configurable upon customer request Compatibility and accessories Designed to clone RF transmitters operating around 433 MHz (e.g., 433.92 MHz). Always check the frequency marked on the original remote; if it differs (315 MHz, etc.), these units will not work. Power supply: 2 × CR2016 (not included). Supplied in a set of 2, ready to use after battery insertion. To use: Insert 2 CR2016 batteries into each remote control, observing the correct polarity. Place the original remote control a few centimeters away from the TOP432EV. Initiate the copying procedure: press and hold the target button on the TOP432EV, then press the corresponding button on the original remote control (follow the provided instructions). Test the cloned remote control with the receiver at close range. If the connection fails, double-check the original frequency (must be 433 MHz ±0.2 MHz) and protocol compatibility. Warnings & Advice: Purchase only if your system uses 433 MHz. Frequency incompatibility will render the remote control unusable. Only use the TOP432EV to clone transmitters that you own or for which you have the explicit permission of the owner. Unauthorized copying may be illegal.