M10 x 1.25 left-hand cutting head with automatic tip - Dual-line trimmer head - Nylon line spool

General Description: The M10 x 1.25 left-hand thread cutting head with automatic tip is designed for clearing large areas, with a cutting diameter of up to 30 cm. Made of strong and durable double-line nylon, it offers automatic line adjustment with a simple press. Its connection is a left-hand thread M10 x 1.25, compatible with many brushcutters and multi-tools. Technical Specifications Thread: M10 x 1.25 Thread Type: Left-hand thread Capacity: Approx. 2.5 m Diameter: Approx. 14 cm Height: Approx. 7.5 cm Line Type: 3 mm diameter round line, suitable for lines up to 3 mm Compatibility and Accessories Compatible with all brushcutters with an M10 left-hand thread and a 1.25 gear ratio, including the following brands: Powermat, Erman, Fuxtec, Timbertech, Brast, Gardentools, Forester, Stihl, Husqvarna, Dolmar, Rotfuchs, Steel, Stenson, Horn, Boomag-Germany, Mc Dillen, Raptor, Helo Installation The line is adjusted during operation by tapping the top of the cutting head on the ground. The line retaining mechanism disengages, allowing centrifugal force to realign the line. Use For optimal winding, it is recommended to use 3 mm diameter line. If you wish to wind 3 mm wire, you will need between 2.5 m and 3 m of wire. Always wear protective clothing and face protection while working.