Manual 2.4L Instant Heated Hot Water Tank 1.5kw for Boiling Hot Water Taps

This instant boiling hot water tank is to be used with 3 in 1 boiling hot water taps or 4 in 1 boiling hot water taps.

The heating unit must be installed installed to a 3-in-1 open vent tap with 5 flexi tails or a 4-in-1 open vent tap with 6 flexi tails and installed as detailed in the diagrams for the product warranty to be valid.

It is essential that the unit is installed as per the provided installation guide and diagrams shown on this listing to ensure correct water flow and pressure. If the water connections have not been correctly plumbed as shown, this can result in internal pressure imbalances, potentially causing damage to the unit Features

Stylish black finish
Large digital touch screen panel
Easy to read, touch sensitive LED digital temperature display
Modern display panel situated at the front of the tank for easy access
Provides quick and efficient boiling water
Compact, ergonomic & user friendly design
CE marked WRAS RCM Approved product
Easy InstallationDimensions: 188mm (L) x 188mm (W) x 270mm (H)
Large 2.4L capacity
WRAS Approved for quality
If you re buying any sort of water fitting or product then it s important that its WRAS (Water Regulations Advisory Scheme) approved. It is the best way to work out if that particular product or part complies with the UK requirements for installation within the UK. 1 minute to re-boil from 95 degree to 98 degree.

Please note: The tank must be installed with a water filter to keep the warranty valid to avoid the build up of limescale

This boiler has been tested and is fully compatible with both 10mm and 6mm tube from the boiler to the filter.

The instant hot water appliance is an open vented system appliance. The operating pressure is 1.5 bar to maximum of 5 bar.
The water filter (Anti-Scale Carbon water filter) must be connected to the electronic instant hot water appliance and replaced every 3-6-months, or the guarantee will be void.