Skip to main content
1/5

Manual Hydraulic Pump Hand Pump Set 10000psi Oil Storage 900CC For wind power, hydropower, nuclear power industry, oil and gas

£119.99
£1Offered
To be applied on the payment page
  • Offer valid today only.
Sold by DENCRESTUK

Product information

Description

Notes: The jack, hydraulic spreader, bridge punch, bending machine, etc. in the picture is not an accessory for this product, it can be used with these products, the picture is the application scene.

Description

Do you want to improve your work efficiency?  Please take a look at this manual hydraulic pump. It is made of high-quality steel, which is resistant to corrosion. The entire body and handle are smooth and easy to clean. In addition, it is highly resistant to blows, so it is strong and not easily deformed. 

Key Features

Humanized Design: The hydraulic pump adopts a non-slip comfortable handle, which is comfortable to hold and energy-saving to use.

Portable Hydraulic Pump: This hydraulic pump is small and lightweight, making it very easy to move and carry.

Simple Operation: This hydraulic pump is integrated and does not need to be assembled after receiving the goods. When in use, you just need to turn on the switch of the unloading valve and connect the hydraulic equipment.

Automatic Switching between High and Low Pressure: The hydraulic pump can automatically switch between high and low pressure. It first works at low pressure and then switches to high-pressure work after being stressed. It can provide greater flow at low pressure, and save effort at high pressure to improve work efficiency.

Wide Applications: The oil pipe joint of this hydraulic pump can be replaced, which can be used with most hydraulic tools and is widely used. Compared with ordinary hydraulic pumps, this hydraulic pump can be used in narrower and lower spaces because it effectively increases its stroke within the height of the body.

Stable Performance: The manual hydraulic pump adopts the principle of pressure balance. There isn't almost any movement of parts and energy consumption during the pressure maintaining process, and the system performance is very stable.

Great Safety: The hydraulic pump is equipped with a safety valve. When the pressure reaches 70MPa, it cannot be operated, which can ensure the safety of users.

Protective Packaging: The product is packed in a honeycomb carton and corrugated paper, which can protect the product from damage during transportation.

Durable Hydraulic Pump: The hydraulic pump is made of high-quality steel, which is not easy to deform. Its surface is sprayed with plastic, which has good wear resistance and corrosion resistance. It can protect the metal material from oxidation.

Details

Plastic spraying Process: The hydraulic pump is sprayed with plastic, so the surface is smooth, bright in color, easy to scrub, and not easy to fade.

Extra-long Rubber Hose: The oil hose is made of rubber and is 78.8 inches long, which can be used flexibly and has an enlarged operating range.

  

Oil Pipe Joint: The oil pipe adopts a ZG3/8'' fast joint, which can improve the disassembly efficiency.

Sealed Fuel Tank: The fuel tank is well sealed, which can balance the air pressure inside and outside the tank and prevent overpressure of the tank.

Metal Protection Coil: Both ends of the oil pipe are equipped with metal protection coils to protect the rubber tube from being damaged during use.

Application

It can be used with hydraulic tools, such as hydraulic cylinder jacks, hydraulic crimping machines, hydraulic punching machines, hydraulic pipe bending machines, hydraulic flanges, etc. It is suitable for wind power, hydropower, nuclear power industry, oil and gas, chemical industry applications, valves, pressure vessel industry, metallurgy, and other industries. 

Specification

Material: Steel, Rubber

Color: Orange

Type: Hydraulic Pump

Drive Mode: Manual

Gross Weight: 10.60kg/23.4lbs

Package Size: 65*18.5*19cm/25.6*7.3*7.5inch

Hose Length: 180cm/70.9inch    

Pump Body Length: 50cm/19.7inch

Manual Valve Length: 44cm/17.3inch

Total Length of Manual Valve: 60cm/23.6inch

Height: 15cm/5.9inch

Fast Joint Size: ZG3/8''

Oil Volume: 900cc(Actual usage 700cc)  

Output Pressure: 60~70Mpa  

Output Pressure: High Pressure 70 Mpa, Low pressure 2~10Mpa  

Package Included

1 x Manual Hydraulic Pump

Notes

Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

Features

  • Brand
    CNCEST
  • Weight
    10.6 kg
  • Material
    Steel
  • Warranty
    1 year(s)
  • ManoMano Reference
    ME97827802
Advice from

Hydraulic workshop press buying guide

Essential for installing ball bearings or extracting bushings, hydraulic workshop presses are able to apply force of up to 50 tonnes. Featuring a hydraulic cylinder and a gauge to control pressure, these devices are mounted on a frame and may be powered or operated manually. Read on for our top tips.
Hydraulic workshop press buying guide
You are here:
The DIY, home and garden specialist

The DIY, home and garden specialist

Reliable delivery

Reliable delivery

Payment in 3x or up to 30 days free of charge

Payment in 3x or up to 30 days free of charge

More than 7 million individual and professional customers

More than 7 million individual and professional customers