Manual room thermostat for electric underfloor heating with AC 220V 16A probe, mechanical thermostat controller for underfloor heating [Energy class A+++]

General Description

This manual room thermostat is designed for flush mounting and offers automatic on/off control for electric underfloor heating and other heating elements. Its temperature control range is from 5 °C to 40 °C with a maximum current of 16 A. Operation is simple thanks to the push button and rotary knob for temperature setting.

Technical Data

• Power supply: AC 230 V, 50/60 Hz
• Power consumption: 5 W
• Temperature range: 25 °C to 55 °C
• Protection class: IP20

Compatibility and Accessories

• Built-in sensor for room temperature measurement
• External 3 m long NTC floor sensor for overheating protection
• Scope of delivery: 1 thermostat, 1 3 m long floor sensor, 2 mounting screws

Installation

The thermostat must be mounted flush with the floor according to the enclosed instructions. Be sure to observe all applicable electrical regulations during installation.

Operation

To switch on the thermostat, turn it on using the button and then set the desired temperature using the rotary knob. The system switches off automatically as soon as the room temperature reaches the preset value. An LED indicator makes it easy to check whether the heating is switched on.