Membrane Water Pump, 24V 100W, Wide Application, Easy Installation, Low Power Consumption

Features:

1. The water pump with pressure switch will be automatically cut off when the water outlet pressure is large enough.
2. High reliability, fast water outlet, high pressure, high stability.
3. Self-priming, quiet operation, low power consumption.
4. Made of durable material, corrosion resistant, wear resistant, durable to use.
5. Used in industrial equipment, chemical equipment, ships, beverage filling, household cleaning, water purification and treatment equipment, vehicle cleaning, agricultural spraying, artificial fogging, pipeline pressurization, air conditioning cleaning.

Specifications:

Features:
1. The water pump with pressure switch will be automatically cut off when the water outlet pressure is large enough.
2.High reliability, fast water output, high pressure, high stability.
3.Self-priming, quiet operation, low energy consumption.
4.Made of durable material, corrosion-resistant, wear-resistant, and long-lasting.
5.Used in industrial equipment, chemical equipment, ships, beverage filling, household cleaning, water purification and treatment equipment, vehicle cleaning, agricultural spraying, artificial misting, pipeline pressurization, air conditioning cleaning, cooling, coal metallurgy, garden spraying, etc.br>Specifications:
Condition: Brand New
Item Type: Water Pump
Model: YA24-100
Voltage: 24V
Maximum Power: 100W
Maximum Pressure: 11KG
Working Pressure: 7kg
Opening Flow: 8 L/M
Vertical suction: 1.5M
Lift: 110M
Package list:
1 * Water pump
Note:
1. Please allow slight error due to manual measurement. Thank you for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Usage Instruction:
1. Connect the pump to the inlet and outlet pipes.It should be ensured that the connection between the inlet and outlet pipes and the pump is tight, otherwise it will cause low pressure or water leakage;
Tip: There are arrows on the pump cover to indicate the direction of incoming and outgoing water. , and the direction of the arrow is the direction of water discharge;
2. Install the filter at the inlet end and the filter density should be greater than 80 mesh (i.e. 80 holes per square centimeter).
3. Connect the micro-membrane pump to the motor. The electrical parameters of the connected power supply must meet the motor input requirements.
4. Turn on the power and the motor pump starts working.
5. The water is drained for 5-10 seconds, drain the air in the pump and pipeline, and after the water is stable, temporarily turn off the power and connect the water gun or pump head.
6.Turn on the power to work.