Mini Pneumatic Chamfer, Portable 45 Degree Handheld Air Chamfer Tool for Cutting Metal (6 R Inserts + 6 C Inserts + 6 Bearings)

Upgraded Design: This mini orange 45 degree chamfering machine has a new lightweight design, small and exquisite, smooth cutting, high efficiency, low vibration, very smooth cutting of carbon steel. Comes with high quality bearings and blades for smoother deburring and chamfering. Adjustable speed and angle: Rotation speed: 30,000 rpm; chamfering capacity: C0.1-C1.5; ARC angle: R0.1-R1.5. Adjustable depth: 0.1mm-0.9mm; air consumption: 0.4/min. Equipped with 1-5 air intake setting, the chamfering machine can be freely adjusted to the appropriate intake speed for use. Use the matching wrench to easily adjust the chamfer size and replace the blade. Safety Assurance: The safety switch is used to prevent accidental contact to protect the user's safety at all times.Alloy steel baffle, safety buckle and metal button for safe use.
Chamfer and ARC angle: Rounding and beveling are possible by changing the inserts (2 types of inserts are optional). Suitable for different angles, such as straight edge chamfering, inner and outer round hole chamfering, and irregular chamfering for metal cutting and round R side.
Application: The pneumatic chamfering machine can be chamfered in the narrowest and shallowest space, suitable for different angles, such as straight edge chamfering, inner round hole chamfering and exterior.;Upgraded Design: This mini orange 45 degree chamfering machine has a new lightweight design, small and exquisite, smooth cutting, high efficiency, low vibration, very smooth cutting of carbon steel.Comes with high quality bearings and blades for smoother deburring and chamfering.; Adjustable Speed ​​and Angle: Rotation Speed: 30,000 RPM; chamfering capacity: C0.1-C1.5; ARC angle: R0.1-R1.5. Adjustable depth: 0.1mm-0.9mm; air consumption: 0.4/min. Equipped with 1-5 air intake setting, the chamfering machine can be freely adjusted to the appropriate intake speed for use. Use the matching wrench to easily adjust the chamfer size and replace the blade.;Safety Assurance: The safety switch is used to prevent accidental contact to protect the user's safety at all times.Alloy steel baffle, safety buckle and metal button for safe use.;

Specifications:
Color: orange, black
Material: plastic steel
Arc angle: r0.1 - r1.5
Chamfer capacity: c0.1 - c1.5
Rotation speed: 30000rpm
Reversible depth: 0.1 mm - 0.9 mm
Chamfered opening: ≥ 8mm
Air intake interface: 1 / 4 inch
Minimum plate thickness: 3 mm
Air intake regulation switch: 5 gears
Air consumption: 0.4m³ / min

[use tips and maintenance]

1. Please inject the pneumatic tool oil before using the new machine, inject about 4c. C in the air inlet. After approximately 3 hours of continuous use, the temperature is approximately 4°C. C is also injected into the air inlet.

2.After injecting the air tool oil, let the machine idle for about ten seconds (do not use it) and thoroughly lubricate the internal parts of the grinder before continuing.

3. The output quantity of the air compressor is about 6~8kg. Typically, much of the compressed gas in a conventional air compressor contains water, and the air compressor piston carries a small portion of the lubricating oil. If you do not use oil-water separator, water and oil and gas will enter inside the machine for a long time. The onset of adhesion slows the rotation of the machine, resulting in a lack of speed and torque.In this way, the pneumatic tool oil must be introduced into the air inlet and the machine will idle for about ten seconds before it can be used normally.

Packages Included (R + C):
1 x Chamfering Machine
6 x R Inserts
6 x C Inserts
6 x Auxiliary Bearings
1 x EU Connector
2 keys