1/5
Miniature soldering iron, portable, 450 °C, 4.5 V, 8 W (operates on 3 AA batteries) ZD-20D--DTEKGAZ
Sold by re-green GmbH
You may also like
Compare with similar items
Product information
Description
Cordless Soldering Iron: Instructions for Use: 1. Clean the workpiece to be soldered of dirt, rust, and paint. 2. Heat the workpiece with the soldering iron. 3. Apply resin-based solder to the workpiece and melt it with the soldering iron. Note: When using resin-free solder, first apply solder paste to the workpiece. 4. Allow the solder to cool and harden before further processing the soldered workpiece. Caution: 1. Always switch off the soldering iron after use by sliding the switch to the "OFF" position. 2. Place the protective cap on the soldering tip when storing the soldering iron. Ensure that the switch is in the "OFF" position. 3. Do not touch the soldering tip while it is hot. 4. Do not immerse the soldering iron in water. 5. The soldering iron may emit some smoke during the initial use while the heating element dries. This is normal and should stop after about ten minutes. 6. Never file down the specially coated soldering tip.
Features
- BrandDTEKGAZ
- power supplyManual
- Maximum operating temperature450 °C
- Soldering iron useElectronic
- ManoMano ReferenceME218794299
- MMID552547068621
- Product code3YLYG20260530-11617
Advice from
Soldering iron buying guide
Are you an electronics or pyrography geek, a model maker, an appliance tinkerer or a PCB designer? If you answered yes to any of these, you're going to need a soldering iron! From soldering iron tips to temperature-controlled soldering stations, let's take a look at what you'll need to ace your first tin soldering project!
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}