Module de contrle de charge de batterie XH M604 Carte de protection DC 6-60V pour arrêt de charge automatique

1. This product is suitable for controlling the charge of 6-60V batteries and can configure charging voltage modes and stop charging voltage.

2. Suitable for use with home chargers, solar power, and wind turbines.

3. Connect a 6-60V charger to the IN end and the storage battery to the OUT end.

4. It is quite intelligent, helps save electricity, and is safe.

5. Automatic power cutoff, saves energy, extends battery life. Specification: Features: This product is suitable for controlling the charge of 6-60V batteries and can configure charging voltage modes and stop charging voltage. Suitable for use with home chargers, solar power, and wind turbines. Connect the 6-60V charger to the IN end and the storage battery to the OUT end. For example, by setting the start voltage to 12V and the stop voltage to 15V, when the voltage is below 12V, the relay closes and sends the charger's charging voltage to the battery; when the voltage is above 15V, the relay disconnects and stops charging and discharging. This is quite intelligent, helping to save electricity and safety. Automatic power cutoff saves energy and extends battery life. Specifications: Input Voltage: 6-60V DC. Display Accuracy: 0.1V. Control Accuracy: 0.1V. Output Type: Direct Output. Voltage Error: +/-0.1V. Application: 6-60V storage battery.

Size: 81*54*24mm/3.19*2.13*0.94 inches

How to Use:

When setting the voltage value, the start button acts as an upward adjustment action, and the stop button acts as a downward adjustment action.

1. Set the starting voltage: In normal display voltage mode, press the button to display the load starting voltage; press and hold for 3 seconds, the digital tube will flash; you can then use the button to set the starting load voltage value.

2. Set the stopping voltage: In normal display voltage mode, press the button to display the stopping load voltage; press and hold for 3 seconds, the digital tube will flash; You can start or stop the button to set the stop charging voltage value.

3. Factory Reset: When powered on, press the start/stop button simultaneously; the digital display will show 888, which represents the factory reset parameters.

Package Included:

1 Battery Charge Control Module.