Motor Mount Bracket 100x50mm Black for NEMA 17 Stepper Motor 2pcs

The motor mounting bracket is primarily used for motors, mainly serving a fastening role. The mounting bracket is a good accessory for stepper motors and is widely used.

The motor mounting bracket has the following dimensions: 100mm x 50mm/4-inch x 2-inch (L*W) overall size, 3.5mm/0.14-inch / motor mounting hole diameter, 31mm/1.22-inch / motor mounting hole spacing, 4.2mm x 33.8mm/0.17-inch x 1.33-inch / bracket mounting hole size, 30mm/1.18-inch / bracket mounting hole center distance, 22mm/0.87-inch / shaft hole diameter

Easy to install and use, it is a good replacement solution; Small size and lightweight; made of steel, durable and long-lasting.

Installation steps: 1. Select the appropriately sized motor mounting bracket; 2. Remove the motor mounting bracket to be replaced; 3. Install the motor mounting bracket.

Please choose the appropriate size of the motor mounting bracket, paying particular attention to the mounting hole diameter and center-to-center distance of the mounting holes.