PPhilippe
Published on 22/03/2023, FranceThe shoulder for the seal is not wide enough, risk of crushing the seal and leaking, especially on a plastic tank. I bought a tap from Leroy-merlin with a wider shoulder. Sincerely
1/2
Multi-tank – Water recovery tank tap – 15 mm brass with 20x27 screw-on nozzle – 3/4" gas thread nut and EPDM gasket included
Sold by AINSCO
Product information
Description
General Description
15mm brass ECO tap, designed for rainwater harvesting systems. This tap is equipped with a nut and a seal, allowing direct attachment to your barrel or tank. It also facilitates the connection of a garden hose thanks to its screw-on nozzle.
Technical Specifications
Material: Brass and Polypropylene (nut)
Inlet: 3/4" Male Thread
Outlet: Brass ball valve with 15 mm screw-on nozzle (3/4" Male gas thread outlet)
Additional 20 x 27 mm brass tap nozzle
Removable white plastic aerator for increased flow
Weight: 225 g
Installation
To install the tap, you need to drill a hole in your barrel or container using a standard hole saw, with a diameter between 24 mm and 26 mm maximum.
Use
The tap allows for easy connection of a garden hose. Simply screw the Gardena 3/4" brass fitting onto the tap to connect your garden hose.
Features
- BrandMULTICUVES
- ColourWhite
- Connection configurationMale
- Output thread3/4" (20x27)
- Width2 cm
Advice from
Water butt buying guide
Cost-effective, environmentally friendly and easy to install, water butts offer a practical solution for anyone hoping to water their garden without increasing their water bill. Designed to be connected to a downpipe, water butts and underground water tanks can range from 300 to 5000 litres in capacity.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}