[NEVER USED] High Power Wireless 433MHz Remote Control Switch, RF Remote Control AC 220V/240V/110V 30A for Lights, Water Pumps, Household Appliances, Agricultural Irrigation

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

General Description: High-power wireless remote control switch operating at 433 MHz, designed to control various electrical appliances such as lights, water pumps, and other household equipment. This device offers stable and reliable performance, with a receive sensitivity greater than -105 dBm, allowing it to penetrate walls, floors, and doors for effective remote control. Technical Specifications: Applicable Voltage: AC 85V ~ 265V; Maximum Current: 30A; RF Frequency: 433 MHz; Supported Encoding: 1527 learning code; Receive Sensitivity: >97 dBm; RF Operating Mode: Superheterodyne ASK wireless reception; Operating Temperature: -30℃ ~ +80℃; Receive Range: Over 50 meters in open space; Quiescent Current: <5 mA. Compatibility and Accessories: Each receiver can store approximately 20 transmitters. One transmitter can control multiple receivers (the transmitter must be paired with the receiver). Installation: To configure the operating mode, press the learning button on the receiver three times. Wait three seconds, then press the ON button on the remote control, followed by the OFF button to complete the learning process. Use: Easy to use with three operating modes: momentary, switching, and latching. Remotely control each device connected to the receiver via the remote control. Ideal for use in homes, farms, factories, offices, laboratories, and supermarkets. Other information: The security system uses an EV1527 learning code for increased stability. An antenna on the receiver improves signal reception.