Normally Closed 12V DC G3/4 Brass Solenoid Valve for Fluid Control

Operation: This solenoid valve is a normally closed solenoid valve, powered to open and close, simple and easy to use, the brass has good rust resistance and can be safely used in "water". Model and Nominal Technical Parameters: ① Operating Mode: Short-term quota system (c. characteristics: Water pressure (MPa) 0.020.10.30.8 (Jinyi factory standard) Flow rate (L/min)>5>11>18>32 (general domestic standard) Flow rate (L/min)>3>8>13>25/2.6 Service life: More than 100,000 cycles. The low-pressure solenoid valve inlet operates under the following environmental conditions: Altitude not exceeding 2500 meters, ② Ambient temperature 0-40℃, Relative humidity less than 95% (temperature 25℃). Arrow: There is an arrow on the valve to indicate the flow direction and guide you in connecting the pipeline. Stable: As long as it is connected to a DC voltage of 12V and a rated current of At 300 mA, this solenoid valve can provide stable performance.