Pack Garage Door Remote Control Set, Universal Garage Door Remote Control, 4 Button Remote Control Cloning Function, Fixed Frequency 433.92MHz Garage Door Remote Control
You may also like
Compare with similar items
Product information
Description
New and fast remote control copying method
1. Clear code:
Press buttons "A" and "B" simultaneously. After the LED flashes three times, release one button while holding down the other. Then press the released button three times. The LED will flash rapidly. All stored data will be erased. The erased remote will no longer have an LED, regardless of which button is pressed.
2. Copy:
One person holds the original remote, the other the copy remote. The two remotes should be as close as possible (ideally next to each other on the desk). Press the copy button on each remote. If the LED flashes rapidly after three flashes, the copying was successful. The other buttons work identically. Since some remotes have lower transmission power, the original remote must be placed on top of the copied remote for use. To avoid interference, make sure all potential sources of interference are eliminated. If copying fails, try again after deleting the code.
Attention:
The original remote control must be working and operate on the same frequency as our remote control.
PROGRAMMING:The universal gate remote control is extremely compact and can memorize up to 4 different radio codes.
It is programmed to learn independently from the original remote control. WIDE COMPATIBILITY:Compatibility: Our universal car remote control is compatible with most fixed code universal remote controls for gates, garage doors and electric doors that operate at a frequency of 433.92 MHz of all brands.
UNIQUE DESIGN:Self-learning gate remote control, it can copy remote controls for gates, garage doors, roller doors and shutters.
It is extremely compact, made of ABS and aluminum and features an elegant design and modern.Features
- BrandSNQ
- Length1 cm
- Width2 cm
- Height3 cm
- Weight15 g
'/%3E%3C/svg%3E){kind=small}