Pack of 10 soldering iron drill bits, 900M-T-I, replacement cutting tool for stations, tin soldering iron drill bits, lead-free

[Lead-free copper base] Heats quickly with oxygen-free copper base, good tin clinging ability, and heat resistance up to 480 for long-lasting use.

[Nickel-iron plated tips] The electrolytic nickel-iron can make the tips difficult to be oxidized, ensuring the tips durable in use and anti-corrosion. If the proper use of the iron tip, its lifespan can reach more than [Type 900M-T-I] Applicable 936, 937 soldering station etc. With its pointed end shaped like a needle, the tips are suitable for craft making, for example, adapting a car alarm holder, as a jump micro switch

[Check sizes] - Outer diameter: 6.7mm / 0.26". Inner Diameter: 4mm / 0.16" Check the size data in the listing photo before purchasing and avoid buying fake tips

[Check the sizes] - Outer Diameter: 6.7mm / 0.26".Inner diameter: 4 mm / 0.16" Check the size data in the photo list before buying and avoid purchasing counterfeit tips.Soldering station tip 995d soldering iron tip for soldering iron soldering tipAs the Type I tip is very strong, it is suitable for crafting, for example, regarding car problems, once a microswitch has popped out of the small circuit, it has been found that the contacts of the microswitch are smaller than a micro (smaller than a pinhead), or for soldering in a tight space, also for repairing the emerging tin bridge of solder to the chip.   Specifications:
Material: Oxygen-free copper
Color: Silver
Type: Lead-free
Plating: Iron and nickel (finished)
Outer diameter: approximately 6.7 mm / 0.26 inches.
Inner diameter: approximately 4.0 mm / 0.16 inches.
Length:Approximately 43mm / 16.93 inches
Package weight: approximately 47g.
Model: 900M-T-I
Applicable: 936, 937, etc. Soldering Station
Temperature Range: 200-480°C
Quantity: 10 pcs/set

Package:
1 x 900M-T-I Soldering Iron Tip Set, 10 pcs total

Soldering Tip Usage Instructions:
A. Clean the tip with a clean sponge;
B. Apply solder to the soldering tips;
C. Turn off the power and allow the soldering tip to cool;
D. Place the soldering iron on the iron stand.

Note:
Do not leave your soldering machine running for extended periods when not in use. no. This can cause it to turn a black oxide coating.