Package Deal: Charnwood W030, Profile Head, Sanding Kit, Rebate Head & Wheel Kit

Package Includes;

W030 Spindle Moulder with Sliding carriage
W030RC 1/2” Routing Collet
CB9830 Cutterblock with Straight Knives & 6 Profiles
W030SD Sanding Drum Kit with 3 Sizes of Drum
WHRCB100: Rebate Block with Spur Cutters
W522: Universal Wheel Base

Cast Iron Main Table
Cast Iron Tenoning Table
Cast Iron Cutter Hood
4 Speeds; Softwood, Hardwood, Routing, Sanding
Maximum Tooling Diameter 160mm
Independently Adjustable Fences
100mm Diameter Extraction Outlet

A precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic recently upgraded spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position.

A simple belt change selects the correct spindle speed for the tooling. The new 4 speed version provides even more versatility;

1500rpm – Drum Sanding
4500rpm – Moulding Hardwoods
6500rpm – Moulding Softwoods
8500rpm – Routing
The cutter hood is cast iron . An extractor with 1000 cubic metres an hour airflow is recommended to cope.
The two aluminium fences are adjustable to set the width of the opening. The outfeed fence can also be stepped out.
The fence angle can be set accurately between 90 and 45 degrees with a useful stop to quickly return to 90 degrees again.

Supplied with sliding carriage, Set of spindle shims, 4 adjustable height rubber feet, 1.9m power cable and UK 3 pin plug.

Charnwood W030 Specification
Motor (induction) 1500w, 240v
Main table size 600mm x 400mm
Sliding table size 400mm x 180mm
Table height 870mm
Fence size 125mm x 700mm
Dust extraction outlet 100mm
Dimensions (WxDxH) 830mm x 1070mm x 1280mm
Min Door Opening:Width In Crate 64cm
Min Door Opening: Width Out of Crate 60cm
Weight 95kg
Rating Light trade