1/5
Panne à Souder, 5 Pièces 900M-T-B Pointe de Fer à Souder de Remplacement, Pointes de Soudure Alliages Plaqué Nickel, Applicable,Station de Reprise de Soudure Conseils Soudage Outil
Of which environmental contribution £0.01 including VAT.
Sold by Tinor-GB
Product information
Description
Soldering tip size: Outer diameter: 6.3mm (±0.1mm), inner diameter: 4.0mm (±0.1mm). Length: 42.5mm (±0.2mm). Maximum working temperature: 400±20℃ (380-420℃).
The 900M soldering iron tip is made of high-quality alloys and has a long service life. This 5-piece replacement soldering tip set is suitable for Weller Hakko, X-Tronic, and 936 937 soldering stations, etc.
The soldering iron tip is small.
It is suitable for delicate soldering, especially when the soldering space is limited, and can also correct the tin bridge generated during chip soldering. If black oxide appears on the soldering iron tip and needs to be cleaned immediately, first adjust the tip temperature to approximately 250°C, then clean the tip with a sponge, and then apply solder. Repeat this process until the oxide is removed. Tips: The operating temperature of the soldering iron tip is 380°C to 420°C. If the temperature is too high, it can lead to corrosion of the iron tip, so please be careful to control the temperature during use.Features
- BrandTINOR
- ManoMano ReferenceME239619106
- MMID109188840426
- Product codeTIN-07599
- EAN3792895471283
Advice from
Soldering iron buying guide
Are you an electronics or pyrography geek, a model maker, an appliance tinkerer or a PCB designer? If you answered yes to any of these, you're going to need a soldering iron! From soldering iron tips to temperature-controlled soldering stations, let's take a look at what you'll need to ace your first tin soldering project!
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}