Passenger Seat Occupancy Sensor Mat, Replacement Emulator, ABS Material for EU E Series Vehicle Interior.

Specification: Item Type: Seat Mat Emulator Material: ABS Function: Solve the passenger position sensor failure problem, cover the faulty passenger occupancy mat sensor, and fix the SRS warning light issue caused by this problem. Once the equipment is properly connected to the car, the warning light indicating that the passenger is in the passenger seat will be sent even if the passenger is not in the passenger seat. Replacement for EU E-series. Package List: 1 x Seat Mat Emulator 1 x User Manual How to Use: 1. Turn off the ignition. 2. Locate the seat mat connector under the passenger seat. You must look for it from the rear seat. The seat belt connector is marked with 1. The seat mat connector is marked with 2. 3. Unplug the seat mat connector and replace it with the emulator connector. 4. Connect the seat belt emulator, if necessary. 5. Connect the emulator. The LED indicator should start flashing in two different colors, indicating that the device is receiving power (12V) and is successfully connected to the SRS control unit. No light means there is no power (there is a problem with the car's electrical system). The LED indicator flashing in one color means the emulator is receiving power but has connection problems with the SRS control unit (this usually indicates a problem with the ACU; please contact us). 6. Reconnect the diagnostic scanner and clear any old error codes. Check if the faulty seat mat error has disappeared. 7. If the error code reappears or the SRS indicator remains illuminated, please follow our detailed installation instructions.