PH0-14 Value Detection Sensor Module, Waterproof Digital Probe Monitor Kit, BNC Connector

Features: 1. [MAIN PURPOSE] pH value detection sensor module and waterproof digital pH probe kit, primarily used for monitoring and controlling pH levels. 2. [APPLICABLE USES] The BNC connector fits most pH meters and controllers, widely used in aquariums, hydroponics, laboratories, etc. 3. [WIDE RANGE OF APPLICATIONS] The detectable concentration range is pH 0-14, giving the pH value sensor module a wider range of applications. 4. [HIGH EFFICIENCY] The sensor's response time is ≤5S, and the stabilization time is ≤60S, making it efficient and convenient to operate. 5. [WITH WATERPROOF PROBE] Equipped with a digital sensor probe, it has a good waterproof effect and features dual temperature compensation. Specifications: Item Type: pH Detection Sensor Operating Current: 5-10 mA Detectable Concentration Range: pH 0-14 Detection Temperature Range: 0-100 ℃ Response Time: ≤5S Stability Time: ≤60S Component Power Consumption: ≤0.5W Operating Temperature: -10 ~ 50 ℃ (Rated Temperature 20 ℃) ​​Operating Humidity: 95% RH (Rated Humidity 65% ​​RH) Terminal: BNC Connector Package List: 1 x pH Value Sensor Module 1 x Digital Probe Note: 1. The probe cannot be tested continuously for extended periods. 2. If using a particulate product such as Photon or Argon, be aware of potential errors. This is a hardware issue related to fluctuating voltage at the analog port, enough to cause your pH reading to fluctuate by 0.7 or more at these low voltage points. To resolve this, you will need to add a 0.1 µF capacitor between the analog port you are using and ground. 3. If you wish to test the pH value, you must purchase pH test fluid separately; without test fluid, you can only measure the temperature.