1/5

STC-1000 Digital Temperature Controller, Heating and Cooling Thermostat, with Sensor, Model: 110/220V

#1 in sales

Of which environmental contribution £0.10 including VAT.

Buying for your business?

Negotiated prices excl. VAT up to -20%

Create a pro account

Sold by INTEMPORELLE

Product information

Description

This digital temperature controller is easy to use and operate, and is particularly suitable for household freezers, water tanks, refrigerators, industrial chillers, boilers, steamers, and industrial equipment. Features: Miniature temperature controller with a large, clear LED display for easy temperature reading. Switchable between cooling and heating modes. Temperature control is achieved by setting a setpoint and temperature difference. Supports temperature calibration and cooling regulation output delay protection. Alarm function ensures safety in case of exceeding limits or sensor failure. High-temperature start corresponds to cooling mode, in °C. Low-temperature start corresponds to heating mode, in °H. P1 Differential Setting Heating Mode (H): When heating power starts and stops at the set value, the measured value ≤ the set difference. Cooling Mode (C): When cooling power starts and stops at the set value, the measured value ≥ the set value + the difference. P2 Maximum Setting Range: The maximum value at the set temperature shall not exceed this value. P3 Minimum Setting Range: The minimum value at the set point temperature shall not be lower than this value. P4 Temperature Correction P4 Temperature Correction P5 Start-up Delay (unit: minutes). P6 High Temperature Alarm P7 Data Lock Function P8 Data Lock Function P9 Data Lock Function enabled saves the current settings. P1 Temperature and setting functions are disabled. To make any modifications, the data lock function must be disabled first. P8 Factory Reset. Press and hold the SET button to enter P8, press the SET button once to activate, and then press the Rst button to restore factory settings. You can also press and hold the + and - buttons simultaneously to perform a POST self-test and restore factory settings.

Features

Brand
ANGEL CERDA
Colour
Black
Width
34.5 mm
Smart
No
Intended use
Indoor
Height
85 mm
Material
Acrylonitrile butadiene styrene (ABS)
Weight
100 g
ManoMano Reference
ME96173499
MMID
881396171764
Product code
XJ-ZLS-008508-ZLS
EAN
9076170607098

Customer reviews

3,5

/ 24 Reviews

Reviews verified by ManoMano

AAlain

Published on 03/10/2026, France

From the very first use on a 1mm steel sheet, the saw teeth wear down and fail to cut the sheet. Not recommended for cutting steel.

FFrédéric

Published on 22/07/2026, France

This device is only suitable for a very small room. I'm very disappointed.

GGIlles

Published on 20/07/2026, France

Perfect

Pphilippe

Published on 06/07/2026, France

Good product, no issues.

FFelix

Published on 27/05/2026, France

It's perfect.

MMicheline

Published on 21/05/2026, France

It protects well, sticks well, just one problem at the joint which comes unglued even after applying double-sided tape along its length.

You are here:

STC-1000 Digital Temperature Controller, Heating and Cooling Thermostat, with Sensor, Model: 110/220V

Choose your model

You may also like

Compare with similar items

Product information

Description

Features

Customer reviews