Pine Marten Den Box - Plywood - L27 x W56 x H57 cm

Den boxes have proved to be a successful conservation tool in Scotland with boxes occupied year after year.

This is a proven design based on the VWT Den Box, which we have optimised for precision manufacture using the specialist equipment in our workshops. Constructed from 18mm precision cut from 18mm exterior grade plywood with 2 strong battens to the back of the box for mounting, this is a box designed to last.

Pine martens have been found to use den boxes to:

• Raise young in spring/summer
• Shelter from bad weather
• Rest in during the day
• Stay safe from predation (foxes) above ground level
• The key features of our den box design are:
• Den chamber size is similar to natural den sites
• Good thermal insulation from the use of thick timber and boarding
• Reduced rain/snow penetration: close fitting panels (precision machined in our workshop) with entrance holes at base and roof with edging.
• Reduced heat losses from convection: snug fitting panels and entrance hole arrangement reduces airflow, particularly around den chamber.

Features:

• Designed to provide an artificial breeding site for pine martens.
• Based on Vincent Wildlife Trust specification.
• Den chamber size is similar to natural den sites.
• Box has good thermal properties and provides a safe, warm, dry marten box.
• Manufactured from exterior plywood.

Specifications:

• Materials: Exterior Grade Plywood with Softwood Batten
• Construction: Panels stapled together with surface sunk staples.
• Finish: Non-toxic water based stain and preservative
• Fixing: Battens on back of box

Dimensions and Weight

• Dimensions: Overall height: 57cm, Overall width: 56cm, Overall Depth: 27cm
• 14kg

.

Our pine marten boxes can be used to provide artificial breeding sites where natural sites (such as tree cavities) are rare or absent.

. Delivery is FREE to UK Mainland excluding Scottish Highlands where a surcharge may apply, please check before ordering.. 2#3