Plastering gun with 6L cup, 3 nozzles, pneumatic paint gun, Plaster-LIAIKI

Plaster gun with cup and 3 nozzles

The air pressure required for projection comes from a compressed air supply. This gun is perfect for large counters. A large, sturdy plastic funnel provides sufficient capacity for easily and effortlessly spreading plaster, plastic blocks, wood chip wallpaper, reinforced plaster, quartz sand plaster up to 6 mm, dry quartz up to 8 mm, plaster, interior and exterior plaster and more.

The plastic bucket has a practical handle, has a capacity of 6 liters and is equipped with a half-moon (slotted) opening. Therefore, the unit can also be worked in a slightly inclined position, allowing you to achieve crisp and clean coating results on walls and ceilings.

Pneumatic suction cup punches should be used at a pressure of 4 to 8 bar.We recommend using a compressor with an air volume of at least 200 l/min; the required air volume is between 227 and 396 l/min.The plaster gun is equipped with a 13.2 mm (¼") compressed air connection.The air shut-off valve allows you to adjust the air pressure.The sturdy, ergonomic handle and long trigger allow you to guide the gun easily and comfortably.The versatile plaster gun comes with 3 interchangeable nozzles: Ø 4.6 mm (3/16"), Ø 6.3 mm (1/4"), and Ø 8 mm (5/16").The plaster gun is detachable and easy to clean.