Pool Level Regulator, Automatic Float Valve for Water Level - Integrated and Built-in Side Inlet - Floating Valve Regulator for Car Wash - For Swimming Pools, etc.

After installation, the float must be vertical.If you need to install it from the top, you will need an elbow to connect the float valve and the inlet line.First, secure the water inlet pipe to a horizontal surface, then connect the automatic water level control valve to the water inlet according to the standard.The main water inlet must be aligned with the standard diameter of the control valve.When in use, the shut-off valve must be fully open.If two valves are installed in the same tank, they must be kept at the same level.Before installation, please clean any impurities from the pipe to prevent blockages.If the water quality is poor, the valve must be properly maintained. If the user notices that the time to add water is becoming longer, they can top up the water inlet and rinse.
Notes: 1.The color of the item may vary from the photo, depending on your computer's display and brightness settings.
2.Due to manual measurement, there may be a difference of 0.1 to 2 cm. Ask Ask💡Note: Due to manual measurement, the size may have a 2cm/1 inch error; due to different monitors and angles, the color and size may be slightly different, thank you for your understanding!