Pool Level Regulator, Water Float Valve, Convenient Water Level Control, Automatic Float Valve, Water Level, Normal Style

After installation, the float must be vertical. If you need to install it from the top, you need an elbow to connect the float valve and the inlet line. Firstly, fix the water inlet pipe on a horizontal surface, then connect the automatic water level control valve to the water inlet according to the standard. The main water inlet should be aligned with the normal diameter of the control valve. When using, the shut-off valve must be fully open. If two valves are installed in the same tank, they must be kept at the same level. Before installation, please clean the impurities in the pipe to avoid blockages. If the water quality is not good, the valve must be properly maintained. If the user finds that the time for adding water becomes longer, he can charge the water inlet and rinse.
Notes: 1.The color of the item may vary from the photo, depending on your computer's display and brightness settings.  Note: Due to manual measurement, the size may have a 2cm/1 inch error; due to different monitors and angles, the color and size may be slightly different, thank you for your understanding!