Portable remote control for gates/garage doors (868.3 MHz) – Compatible with HSE-4 / HSE2 / HS4 / HS1 / HSS4 / HSP4 – 1 piece

Compatibility: Our replacement garage door opener is compatible with the following remote controls: HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, and HSS4-868-BS. Note: Please do not purchase this item if your original remote control has not been restored. Important note: Please do not purchase this item if your original remote control does not have a memory function. This remote control is not an original remote control, but a replacement for a garage door opener. Two programming methods: Copy the code from the original remote control or program via the receiver. Note: Integrated memory codes (blue LED)! If your original remote control uses fixed codes (red LED), this one will not work. Compatibility: Our replacement garage door remote is compatible with the following manual remotes: HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, and HSS4-868-BS. Note: Please do not purchase this product if your original remote cannot be reprogrammed. Important: If your original remote cannot be reprogrammed, this is not possible. This remote is not an original remote, but a replacement for your garage door. Two programming methods: Copy the code from your original remote or program the remote directly. Note: Integrated codes (blue LED)! If your original remote uses fixed codes (red LED), this remote will not work.

2-Pack Garage Door Remote Controls (868 MHz) – Compatible with Hörmann HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, HSP4-868-BS
Compatible Models:
For HORMANN HS1-868-BS.
For HORMANN HS4-868-BS.
For HORMANN HS5-868-BS.
For HORMANN HSE1-868-BS.
For HORMANN HSE2-868-BS.
For HORMANN HSE4-868-BS.
For HORMANN HSP4-868-BS.
For HORMANN HSD2-868-BS.
For HORMANN HSS4-868-BS. Note: Integrated programming codes (blue LED)! If the original remote uses fixed codes (red LED), the new remote will not work. Questions about the programmer? 1) Press and hold the button on the new remote. Note the code on the original remote. While still holding the button, press another button three times until the red LED lights up for 10 seconds. Then release all buttons. 2) Place the original remote near the left edge of the new remote. 3) Press the button on the original remote. Note the code until the LED flashes red and blue alternately. Check if the LED on the new remote lights up blue. If not, move as close to the original remote as possible. 4) Once the blue LED on the new remote flashes rapidly, the programming process is complete. Release all buttons. 5) Repeat the process for the remaining buttons. Reinitialization Method: Each button on the remote control is assigned a new radio code according to the previous steps. (1) Remove the battery and hold it down for 10 seconds. (2) Press and hold a button on the remote control. (3) Insert the battery. The LED will slowly light up and remain blue for 4 seconds. The LED will then quickly light up and remain blue for 2 seconds. The LED will then remain solid blue. (4) When the remote control button is released, all radio codes will be played. Note: If the remote control button is released too soon, no new radio code will be assigned.