Power Converter Buck Module Aluminum Shell Voltage Module DC 72V to 12V 25A 300W

Features:1.The 72V to 12V step-down power converter provides protection functions such as overcurrent, overvoltage, overheating, and short-circuit protection.
2.Made of silicone and aluminum, it is waterproof, dustproof, and shockproof, suitable for various harsh environments.
3.The design adopts waterproof encapsulation technology to protect the circuit in all directions, resulting in greater stability and reliability.
4.Conversion efficiency up to 96%, fast transmission, suitable for various power reduction and stabilization scenarios.
5.Commonly used in LED car displays, surveillance cameras, electric fans, water pumps, motors, digital photovoltaic power control equipment, etc.
Specifications:Item Type: Power Converter
Material: Organic Silicone + Aluminum
Model: GYVRM-JD1L721225
Input Voltage Range: 72V (DC60-90V)
Output Voltage: 12V
Rated Output Current: 25A
Output Power: 300W
Protection Rating: IP67
Conversion Efficiency: Up to 96%
Operating Temperature: -20℃~+80℃
Installation Cable Length: approx. 13 cm / 5.1 inches

Package List:Package includes 1 x power converter
1 x wiring diagram
Note:1. To ensure normal operation of the converter within the input voltage range, the input voltage must not be lower than the minimum or maximum input value restricted by the product during use, and the input voltage must be greater than the output voltage.by more than 2V.If there is no 2V difference in voltage, the output value will be lower, but this will not damage (affect) the converter's operation.The input current must be greater than or equal to the power required by the output load device (for example, if the load device requires 100W, then the input power must be greater than or equal to 100W).When the converter is in use, the current from the load device must not exceed the maximum current the converter can handle. Leave as much headroom as possible to ensure the converter operates normally and achieves the highest possible conversion efficiency.3.The positive and negative terminals of the converter must not be connected in reverse during operation.Reverse connection can damage the converter.It is recommended to add a suitable fuse to the input terminal during operation.The chip operates in light load mode when there is no load, and the output voltage may vary within a certain range.