Precision mortising jig and 2-in-1 woodworking jig for locating holes, clamp connector for woodworking - LIAIKI

【7 Different Standard Patterns】Use a template and various combinations of guide bushings and router bits to create 7 different standard mortises for loose tenons, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, and 14mm.

Precision and Accuracy: Accuracy and precision make for superb mortises, delivering precisely milled tenons in several wood species designed specifically for exposed joinery.

【Easy to Use】Simply place the right router bit and guide bushing combination in your plunge router, align the index marks on the template with the center lines of your mortise and tenon. You have infinite control over the mortise depth (within the limits of the router bit). For the decorative look of exposed tenons, simply set your cutting depth to remove completely through your material.

【Index Pins】The index pins centered in the notch jig make it easy to keep the ends of the joint pieces perfectly aligned. Simply hold the outer faces against the reference edge and the end of your stock against the index pin, and your joints will pop out perfectly. The index pins also make projects like grilling easier. Just drop the pin into the pre-polished notch and cut the next one.

【Applicable at Any Angle】The jig can be rotated on the sliding base to cut the notch at any angle relative to your stock. This feature opens up design possibilities in the construction of chairs and stools, as well as doors and mosquito nets.

Product Description

Product Description:

Make mortises of various sizes.

Suitable for cutting at any angle: the jig can be rotated in the sliding base to cut the mortise at any angle relative to your stock.

This feature offers an opportunity for designing chair and stool frames, as well as doors and mosquito nets.

Product Specifications:

Material: ABS plastic

Dimensions: 18 x 18 x 4 cm

Easy to use:

Step 1: Place the correct combination of the cutting head and the guide sleeve in the plug-in cutter head.

Step 2: Align the index mark in the template with the mortise center line, then route.

The depth of your router can be limited to unlimited.

Step 3: For the decorative look of the exposed tenon, simply adjust the cutting depth to fully penetrate the material.

Package includes:

1 loose tenon