Premium Stainless Steel Studs for Worx Landroid Model S/M Lawnmower 2mm Thickness, Improved Traction - Polished Deburring - Wheel Diameter: 205mm

Improve traction - with our spikes for Worx robot mowers, there are no more holes in the lawn, it is easier to roll in the mountains and it does not slip on rainy days. 205mm in diameter and 2mm in thickness.Stainless steel material - Our Worx robot mower tips are made of 304 stainless steel and polished in an extra step of production to achieve a perfect appearance. All edges of the Worx Traction Enhancer are deburred.Premium Phillips Head Screws - 4 x 20mm stainless steel Phillips head screws ensure easy mounting of the trimmer tips, and the Recessed screw holes allow screws to fit snugly, so lawnmower wheels won't get caught by screw heads.Fits all S and M models (not for models 2021) S300 [WR130E], M500 [WR141E], M700 [WR142E], M1000 [WR143E], S450i [WR101 SI], S4. 50i [WR102SI], S450i [WR106SI], S700i [WR101 SI], M800i [WR111MI], M800i [WG757E], M900 [WG758E], M1000i [WG796E.1], M50. 0 2.0. [WR165E], M700 2.0 [WR167E]Quality Service - Your satisfaction is our goal. We offer 100% after-sales service for our robot nail clippers.Product DescriptionTips for Worx S&M ModelsThe high-quality stainless steel spikes ensure much better traction for your robotic lawnmower.On wet surfaces, steep terrain or difficult terrain, the robotic lawnmower can get stuck and dig unsightly holes in the the lawn.With our spikes, that's a thing of the past.Stainless steel material and high quality Phillips screwsOur lawnmower spikes Worx robotics are made of stainless steel and polished in an additional production step to achieve a perfect appearance. All edges of the Worx traction enhancement are deburred.4 x 20 stainless steel Phillips screws can ensure easy assembly of the robotic lawn mower tips, and the countersunk screw holes allow the screws to be fully seated so that the wheels of the robotic lawn mower are not pinched by the screw heads.MOUNTING INSTRUCTIONSMounted on the outside of the tireTools needed:Cross drill1.5 mm drill bit (optional)Assembly advice Place your Worx Landorid vertically so that the left or right tire is facing up. Place the studs on the wheel and center them. It is now possible to pre-drill holes with a 1.5 mm drill bit. Then use the supplied stainless steel screws to attach the studs to the tire.