Professional 1L Constant Pressure Tank 1/2 MNPT Port Pre-Pressurized Accumulator for Boat Travel Trailer Maximum 125PSI – High Strength, DIY, Workshop, Construction, Installation

Features:1.Product Use: The accumulator tank provides constant pressure, reducing frequent pump start-up and stopping, making the water flow smoother, stabilizing and buffering, protecting the water pump, and ensuring quiet and stable operation.
2.Capacity and Range: This tank has a large 1L capacity and is suitable for most pumps on the market, with a pressure range of 10 psi to 125 psi, ensuring constant pressure and effectively resolving pulsation problems in the vehicle's fresh water system.
3. Wide application: Pre-inflate the tank to a pressure of 10 psi (0.7 bar) before leaving the factory. Compatible with RVs and boats, filling food and beverages, transporting liquids, and any other pressurization system, helping to reduce frequent pump starts.
4.Easy Installation: The connection port uses a threaded joint, and the wing nut connector is attached to one end of the accumulator tank.The hose is secured with a clamp and connects the accumulator and the pump.Sealed and Secure: The inlet and outlet diameters are 1/2 inch MNPT, using a standard car tire valve.The pressure tank provides a sealing structure to effectively prevent leaks or disconnections during use, thus improving safety and reliability.
Specifications:Item Type: Accumulator Tank
Size: Approx.30 x 14.4 cm/11.8 x 5.7 inches
Internal Volume: 1 L (33.8 FL.OZ)
Inflation Pressure: 10 PSI/0.7 bar
Maximum Operating Pressure: 125 psi/8.6 bar
Air Fill Valve: Standard car tire valve
Inlet and Outlet Diameter: 1/2 inch MNPT
Product Use: Maintains constant pressure, preventing system pressure fluctuations and ensuring a smoother water flow.
Function:
1.In RVs:
Effectively absorbs excess hot gas entering the water system due to heating, eliminating popping noises when the tap is opened.
2. When the RV leaks:
After long-term use of the RV, the pipeline connection may loosen, and drip-feed water leaks may occur, resulting in frequent pump starts.At this stage, the pressure tank can effectively reduce the number of pump starts.
3.During bathing:
The water pump starts and stops frequently due to uneven pipes and nozzles, and the pressure tank can effectively improve this situation.
Operating principle:
1.The pressure tank is pre-pressurized before leaving the factory.
2.When the water pump is turned on, water enters the pressure tank.When the pressure tank is full, the water pump stops operating.
3.When water is needed, the water in the pressure tank first enters the pipe under the pressure of the bladder.The water pump remains off until the pressure in the pressure tank is lower than the pump's start-up pressure, and the cycle repeats.

How to Use:Direct Installation and Use
Package List:1 x Accumulator Tank
2 x Wing Nut Connectors
1 x User Manual
Note:Please read the user manual carefully before use and set the air pressure in the tank below the pump's switching pressure of 3 psi (0.2 bar).