Pump on Water Oil Drill, Electric Drill Nozzle Fuel Oil Pump, Self-Priming Oil Drilling Fittings, for Aquarium Pond Statuary Fountain Garden

[Material] -The electric borehole water pump is made of ABS and alloy. Has high hardness and good sealing. Please wipe with lubricating oil before each use and rinse with clean water after use. When pumping abrasives and liquids containing solids, it is necessary to add a filter to the inlet pipeline to obtain a longer lifespan.

[High performance] -The operating temperature range of the fuel pump is 5 to 49 degrees. The oil pump flow rate at 1500 rpm is 15 L per minute, and the oil pump flow rate at 3000 rpm is 30 L per minute. Note: the recommended speed is between 1500 and 3500. Before use, make sure that the pipe at the inlet of the oil pump connector is sealed, and the length of the pipe should not exceed 2.75 meters (9 feet).

[How to use] -Our product is driven by an electric drill. After starting, check whether a certain fluid in the water inlet pipe is drawn into the pump within 15-20 seconds. Otherwise, you need to check whether the inlet pipe oil pump is correctly installed on the oil inlet pump. Note: Do not let the pump dry out! If the pump does not start, check if the hose is kinked or blocked. Do not operate the pump in reverse!

[Portable] -The pump body is small in size, compact in appearance, light in weight and easy to carry. You can easily transport it to the desired workplace, then install it and start using it, saving time of work. It is best to install a sealing ring at the interface to ensure leakage during use. Check whether it is installed correctly before use and whether the air in the oil pump has been drained.

[Widely applicable] -The oil pump can also be used as a water pump. It is also suitable for swimming pools, aquariums, fountains and can also be widely used for house cleaning.

-Contact our customer service in case you need further assistance