PVC ball valve, U-PVC plastic valve, flow control and straight shut-off seal (φ20 mm)

Made of thick PVC.

Connector type: Adhesive

Type: Two-way straight ball valve

This plastic water line valve is suitable for pipe diameters of 20/25/32/40 mm.

Package contents: 1 x U-shaped PVC ball valve

Installation instructions: First, clean the pipes and ball valves. Then, apply adhesive to the pipe and install it for a few minutes. It will be fully bonded after 2 hours.

We recommend watering after 24 hours.

The entire body is equipped with a red T-shaped handle for easy water flow control.

Widely used in irrigation and piping systems.

Product Name: PVC Plumbing Ball Valve.

Material: PVC

Color: Gray.

Connection Method: Glue connection.

Valve Inner Diameter: 20/25/32/40 mm.

Hose Fitting Size: Outer Diameter 20/25/32/40 mm.

Applications: Irrigation systems, piping systems.

Type 1: PVC ball valve with an inner diameter of 20 mm (= DN-15).

Type 2: PVC ball valve with an internal diameter of 25 mm (= DN-20).

Type 3: PVC ball valve with an internal diameter of 32 mm (= DN-25).

Type 4: PVC ball valve with an internal diameter of 40 mm (= DN-32).

The entire body is equipped with a red T-shaped handle for easy water flow control.

All valves consist of a ball integrated into a pipe to control the flow.

The ball is attached to a lever handle, and rotating the lever handle fully opens or closes the valve.

Easy to use.

Widely used in water supply, waste treatment, irrigation, and industrial applications.

Widely used in irrigation and piping systems.

Connection method: The product is made of PVC. Use PVC glue when connecting. This is not a hot-melt connection.

Installation tips: For pipe fittings, apply glue to the pipe for one minute and install for 15 minutes. It will have some strength after 2 hours and become more watery after 24 hours.

Package quantity: 1 x PVC ball valve