PVC ball valve, U-PVC plastic valve, straight connectors for flow control and shut-off (φ20 mm)

Made of thick PVC.

Connector type: Adhesive glue

Type: Straight two-way ball valve

This plastic water pipe valve is suitable for pipes with diameters of: 20/25/32/40 mm

Package contents: 1 x U-PVC ball valve

Installation instructions: First, clean the pipe and the ball valve. Then, apply glue to the pipe and install for a few minutes. It will reach full strength after 2 hours.

Full body with red T-handle for easy water flow control.

Widely used in irrigation and piping systems.

Product Description:

Product Details:

Product Name: PVC Ball Valve for Plumbing

Material: PVC

Color: Gray.

Connection Method: Glue connection.

Valve Inner Diameter: 20/25/32/40 mm.

Hose Fitting Size: 20/25/32/40 mm outer diameter.

Application: Irrigation system, piping system.

Features:

Type 1: PVC Ball Valve Type 1: 20 mm internal diameter (DN-15).

Type 2: 25 mm internal diameter (DN-20) PVC ball valve.

Type 3: 32 mm internal diameter (DN-25) PVC ball valve.

Type 4: 40 mm internal diameter (DN-32) PVC ball valve.

Features:

Full body with red T-handle for easy water flow control.

All valves have an integrated ball in the pipe to control the flow.

The ball is connected to the lever handle, which is turned to fully open or close the valve.

Easy to use.

Widely used in irrigation systems and piping systems.

Connection Method:

Product made of PVC. It is glued with PVC glue during connection. This is not a hot-melt connection.

Installation Tips:

For pipe fittings, the pipe is coated with glue for one minute and installed for 15 minutes. It will have some strength after 2 hours, and the water flow will be optimal after 24 hours.

Package Quantity: 1 PVC ball valve