1/4
PVC ball valve, U-PVC plastic valve, straight connectors for flow control and shut-off (φ40 mm)
Of which environmental contribution £0.10 including VAT.
Sold by Sinocor GmbH
You may also like
Compare with similar items
Product information
Description
General Description
This PVC ball valve is designed for controlling and stopping water flow. Made of thick PVC, it is durable and resistant. The connector type is adhesive, and it is suitable for pipes with diameters of 20, 25, 32, and 40 mm. It is equipped with a red T-handle for easy flow control.Technical Specifications
- Material: Thick PVC
- Connector Type: Adhesive glue
- Compatible Pipe Diameters: 20/25/32/40 mm
Installation
- First clean the pipe and the ball valve.
- Apply glue to the pipe, then install the valve.
- Wait a few minutes for the glue to set.
- The valve reaches full strength after 2 hours.
- It is recommended to water after 24 hours.
Applications
This valve is widely used in irrigation and piping systems, allowing for effective control of water flow.Features
- BrandTEHTUY
- MaterialPVC
- Pipe thread size1/4" (8x13)
- Fitting diameter40 mm
- Pcs per pack1
Advice from
Watering connections buying guide
Connector, quick coupling, aquastop connector, tap connector, repair valve, splitter or barbed nozzle...all these terms are key to your installation and successfully connect your garden hoses to each other. A whole family of garden hoses! In 15/21 or 20/27, for pipes of 15 or 19 mm, pepare to be unleashed!
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}