REF PX120ME1023481

PX120 Panel Moulding

In stock
In stock
4 options
Secure Payment
Delivery method
  • At home between 29/09/2021 and 05/10/2021 for any order placed before 5 pm
Sold by House Martin and 1 other seller
Product details
  • Height
    4 cm
  • Length
    2 m
  • Kind
    Decorative element
  • Material
    Polymer, Polystyrene
  • Width
    3.961 cm
  • Style

The PX.120 is a chunky 40mm high x 20mm wide panel mould, which is ideal in larger rooms than our similar PX.103 panel moulding. You may wish to add the PX120.A corner elements where this moulding is being used to create wall panels. Each PX120 is produced in a white primer which can be decorated in any colour

Orac panel mouldings are made from durable man-made materials and suitable for exterior use. Customers use the PX120 to create detailing around window frames and walls. The symmetrical PX120 moulding is easy to apply using our FDP700. Remember to use a single coat of exterior grade paint once installed. Orac Axxent dado rails are used throughout Europe. Use the symmetrical PX.120 to refurbish your home if you are looking to create a traditional style, but without the hassle of painting each profile two or three times. The lightweight Duropolymer material should adhere to your wall with minimal support from panel pins, and be ready to accept one finishing coat of paint within six hours in most centrally heated rooms. If you are new to these products you'll appreciate the installation guide we send with each consignment, and the fact that just one coat of paint is required. Any cutting or finishing is the work of a moment, and you can use a fine or medium sand paper if you your initial saw cut is slightly off centre

  • Length: 200cm
  • Width: 3.961cm
  • Length: 1.938cm